MONDIALE CELTIC 14 MANUAL HOW TO
MONDIALE CELTIC 14 MANUAL SERIAL NUMBER

Need to figure out a way to make that better. The only other thing I've noticed is that the feed engagement lever on the apron gets consistently stuck in the 'on' position and needs a smack to disengage. I replaced it with a small piece of shim stock cut to fit. The pin that came out was a 0.057' square key. The shear pin was broken on the leadscrew, but that was an easy enough fix. I ran through the spindle speed range and a few random feeds/threading settings, and all seem to work fine. There are two 'J's' for forward and reverse, and same for the 'K's'. The J-J-K-K lever controls the leadscrew rotation. I don't have the extra gears required for modular or diametric pitch threads, but I think I'll manage without :-) It's currently setup for II: imperial, and metric just involves flipping the 36 and 127 tooth gears. The Roman numerals refer to the change gear setup behind the outboard panel, as the lathe can be setup for screwcutting: Hopefully this can help someone who's equally clueless in the future.

MONDIALE CELTIC 14 MANUAL HOW TO

Thanks in advance for ANY info on how to use this lathe! Also, there are Roman numerals in some of the row headers, but I see no Roman numerals anywhere else on the machine. What does that mean? B and D are on different dials. The threading/feeds chart also has some weird headings, like 'BD'. Horizontal lathe Brand: Celtic Type: 14 Voltage: 380 V three-phase Power: 4 Cv Length. Includes reproductions of the lathe's screwcutting, power-feed and spindle speed charts.

Ccvltp7ruc We can supply CY series lathes with stocks: Gap Bed Manual. Mondiale Celtic 14 N Lathe (New style with angular styling) Operation and Maintenance Manual with Parts Manual as Sectional Drawings. I think that A-B and the 4 position dial control the spindle speed, BUT/ the forward / reverse lever on the apron also has 5 positions: fast for / slow for / off / slow rev / fast rev. L + Z lathe Make Mondiale-Celtic Type Celtic 14 Gdrgw09d turning length 750 mm. There's a 4 position dial below that, on the plinth casting There are 3 dials below the headstock, marked as follows: There are 2 dials on the headstock itself, marked A-B and C-D It's a bit more complicated than my Lodge and Shipley.

In the meantime, though, I'm hoping someone here has used one of these lathes and can advise on the dials and controls on the headstock. I got hold of a user manual in French, and am planning to translate it to figure out lubrication etc.

MONDIALE CELTIC 14 MANUAL SERIAL NUMBER

It's the older of the two styles I've seen, but haven't found a serial number yet to date it. I just picked up a good condition Celtic 14 lathe, made in Belgium by Mondiale.

Mondiale celtic 14 manual